Cut, melt, join.
Seven processes, on our own machines, by our own hands.
01 / 07
The work spins against the cutter: round plastic parts, turned to shape.
Our OKUMA LB4000EX-II CNC lathe, installed in 2024, changes the 12 tools on its turret automatically to turn round plastic parts. For volume runs and small batches alike.
02 / 07
Two gantry machines cut large sheets to the programmed shape.
Two Shoda gantry NC routers (NCN1200 and NCN1210) that change tools automatically. The NCN1200 has a working range of X3,250 × Y1,710 × Z350 mm (manufacturer's standard specification). Smooth edges with minimal burrs. High-mix, low-volume work, from prototype to production.
03 / 07
Hot air and a rod of the same plastic fuse the seam. The joint holds.
PVC, PP, PE and more, fused with hot air and a filler rod of the same material for a strong joint. For reinforcement where adhesive is not enough, and for airtight chemical tanks and vacuum vessels.
04–07
04
NC lathes for production runs, manual lathes for one-offs.
A numerically controlled lathe switches between dozens of cutting tools in a set sequence, adjusting speed and feed to the material. Ideal for volume production and clean curved profiles.
05
A rotating cutter for faces, slots and holes. Suited to small quantities.
A multi-tooth cutter for facing, slotting, drilling, side milling and polishing. Quick to set up; ideal for partial machining and small quantities.
06
Sheet cut to size, up to 3,050 mm square and 45 mm thick.
On a Shinx HP1 panel saw, cut to size up to 3,050 mm long, 3,050 mm wide and 45 mm thick.
07
Exhaust ducts and pipework, from design to installation, all in-house.
Ducts, chambers, dampers, hoods, filter boxes and flues, in stainless steel and PVC. Designed, made in our own factory, installed and maintained by us. Plant piping planned around pressure, temperature, valve layout and pump vibration.
08Maximum size
Maximum sizes on our main machines.
09From material to installation
ContactGet in touch
Request a quotation by form, phone, fax or email. Please send drawings by fax or as an email attachment. We usually reply by the next business day.
